Answers

  • 0
  • 0

Global CoCrW Powder market trend 2023-2026 High Purity 3D Printing Alloy CoCrW Powder by Newsfavorites

Under the spread of the new crown epidemic, after Americans experienced life and death, they set off the largest "resignation wave" in history, and the number of resignations broke the highest record since statistics began in 2000. Since April this year, more than 4 million people in the United States have voluntarily resigned each month. In August, the number of resignations exceeded 4.27 million, and in November, it rose to 4.4 million. The operation of society is linked. The large number of departures in the United States has led to a large shortage of labor; and the shortage of a large number of labor has directly led to the supply chain crisis in the United States; the supply chain crisis has directly affected prices and prices in the United States. The economy has a direct effect on people's lives.
The economic downturn will affect the market demand for CoCrW Powder .

About 3D Printing Alloy CoCrW Powder:
3D Printing Alloy CoCrW Powder is one of the Stellite alloys, which are hard alloys resistant to various types of wear and corrosion as well as high-temperature oxidation. Namely commonly referred to as cobalt-based alloy. Initially, the Stellite alloy is a cobalt-chromium binary alloy and later developed into a cobalt-chromium tungsten ternary composition. Cobalt-Cr-W alloy is an alloy with cobalt as the main component, containing a considerable amount of chromium and tungsten and a small amount of nickel, molybdenum, silicon, carbon, niobium, tantalum and occasionally iron. Depending on the composition of the alloy, they can be made into welding wire, powder for hard surfacing, thermal spraying, spray welding and other processes, as well as cast and forged parts and powder metallurgy parts.

The basic composition of cobalt-chromium-tungsten alloy is: Co:50%~58%,Cr:28%~30%,W:4%~6%,Ni:2%~4% and other alloy composition, melting point is 1470℃.As can be seen from the composition of the alloy, the cobalt and tungsten content of the alloy are very high, which makes the material has excellent high-temperature performance and has poor thermal conductivity. It is these characteristics that make the cobalt-chromium tungsten alloy in the grinding process spark is dark red, the number of sparks is very small, the metal from the workpiece surface is easy to block the grinding wheel, so that the grinding conditions quickly deteriorate, at the same time produce a lot of grinding heat can not quickly spread, resulting in low efficiency, workpiece surface burns. Feel free to send an inquiry to get the latest price if you would like to buy 3D Printing Alloy CoCrW Powder in bulk.

3D printing CoCrW bonding alloy powder
 
Composition(percentage by mass)

Co Cr W Si C B Mn Fe
Bal 27.62 8.79 1.5 0.99 0.56 0.5 0.5


Additional elements less than 1%: N, Nb
Contains no nickel, beryllium or iron

category Alloy grades and characteristics
Alloy number: CoCr(W)
Particle size: 0-20μm, 15-45μm, 15-53μm, 53-105μm, 53-150μm, 105-250μm
Morphology: Spherical or nearly spherical
Appearance: Grey
Package: Aluminum bag, Vacuum packing
Application: 3D printing metal powder
Other applications: powder metallurgy(PM), injection molding(MIM), spray painting(SP) etc.


How is 3D Printing Alloy CoCrW Powder produced?
The waste iron is smelted to the melting point, and then the eight raw materials of cobalt, chromium, tungsten, sulfur, silicon, carbon, aluminum and copper are added in turn, and then the temperature is reduced to 1150-1200°C for high-temperature solution treatment for 40-60min, and then the temperature is again reduced to 880-970°C for aging treatment for 2-3h, and the cobalt, chromium and tungsten alloy is obtained through annealing treatment again.

Applications of 3D Printing Alloy CoCrW Powder:
CoCrW powder is one of the rough alloys that can resist various types of wear, corrosion and oxidation at high temperatures. Depending on the composition of the alloy, they can be made into welding wires, powders for hard surface substrates, thermal spray, and spray. They can also be made into castings, forgings and powder metallurgy parts.

COCRW powder can be used in laser/electron beam additive manufacturing (SLM/EBM), powder metallurgy (PM), spraying, welding and other processes. The powder is mainly used for 3D printing of biomedical materials, such as teeth, body supports, artificial joints, etc.

Cobalt-Cr-W alloy is widely used in locomotive engines, nuclear power plant valves, Marine engines and various aircraft.
Early cobalt-chromium - tungsten alloys were produced by non - vacuum smelting and casting processes. Later developed alloys, such as MAR-M509 alloy, which contains more active elements such as zirconium and boron, are produced by vacuum smelting and vacuum casting.

Generally, cobalt-chromium-tungsten alloy lacks a uniform strengthening phase. Although its strength is low at medium temperature (only 50-75% of that of nickel-based alloy), it has high strength, good thermal fatigue resistance, thermal corrosion resistance and abrasion resistance at temperatures higher than 980℃, and good weldability. It is suitable for the production of guide vane and nozzle guide vane of aviation jet engine, industrial gas turbine, naval gas turbine and nozzle, etc.

Storage Condition of CoCrW Powder:
The damp reunion will affect CoCrW powder dispersion performance and using effects, therefore, CoCrW powder should be sealed in vacuum packing and stored in cool and dry room, the CoCrW powder can not be exposure to air. In addition, the CoCrW powder should be avoided under stress.

Packing & Shipping of CoCrW Powder:
We have many different kinds of packing which depend on the CoCrW powder quantity.
CoCrW powder packing:vacuum packing, 100g, 500g or 1kg/bag, 25kg/barrel, or as your request.
CoCrW powder shipping: could be shipped out by sea, by air, by express, as soon as possible once payment receipt.

Luoyang Tongrun Nano Technology Co. Ltd. (TRUNNANO) is a trusted global chemical material supplier & manufacturer with over 12-year-experience in providing super high-quality chemicals and Nanomaterials, including boron powder, nitride powder, graphite powder, zinc sulfide, 3D printing powder, etc.


If you are looking for 3D printing metal powder, please feel free to contact us and send an inquiry, email address: sales2@nanotrun.com


3D Printing Alloy CoCrW Powder Properties

Other Names Cobalt Chromium Tungsten, Cobalt 6B, Stellite 6B ,Co-Cr-W
CAS No. N/A
Compound Formula CoCrW
Molecular Weight N/A
Appearance Gray metallic solid in various forms (ingot, tubing, pieces, powder)
Melting Point N/A
Solubility in water N/A
Density <4.2 g/cm3
Purity N/A
Particle Size 0-20&mu;m, 15-45&mu;m, 15-53&mu;m, 53-105&mu;m, 53-150&mu;m, 105-250&mu;m
Boling point N/A
Specific Heat N/A
Thermal Conductivity N/A
Thermal Expansion N/A
Young's Modulus N/A
Exact Mass 294.824632 g/mol
Monoisotopic Mass 294.824632 g/mol
   
   

3D Printing Alloy CoCrW Powder Health & Safety Information

Safety Warning N/A
Hazard Statements N/A
Flashing point N/A
Hazard Codes N/A
Risk Codes N/A
Safety Statements N/A
RTECS Number N/A
Transport Information N/A
WGK Germany N/A
If you are looking for 3D printing metal powder, please feel free to contact us and send an inquiry, email address: sales2@nanotrun.com

The war in Russia and Ukraine is roiling global financial markets. Russia and Ukraine are important commodity suppliers in the world, so their conflict is bound to make a full impact on the global commodity supply. In view of this, the price of the CoCrW Powder may continue to rise in the future.

Inquery us

Our Latest Answers

Global early strength agent market trend 2024-2028 What Role Do Early Strength Agents Play? by Newsfavorites

Under the premise of ensuring the quality of concrete, early strength agent can greatly shorten its final setting time, make it as early as possible, and then accelerate the turnover of template, save template dosage.…

Global WNiFe alloy powder market trend 2024-2028 What is Tungsten Nickel Iron W-Ni-Fe Alloy? by Newsfavorites

The US Commerce Secretary has announced that the US will temporarily lift tariffs imposed on Ukraine during the Trump administration to help Ukraine recover its economy and continue to show support for the Russia-Ukraine situation. "For steel mills t…

Global pce powder market trend 2023-2026 Combine Polycarboxylate Superplasticizer with Early-strength Component by Newsfavorites

With the wide application of polycarboxylate superplasticizer, the requirement of concrete early strength in practical engineering is more and more prominent, so the polycarboxylate superplasticizer has been the focus of research to meet the early st…